Mesa Boogie Mark Five: 35 Guitar Amplifier Head, Black Bronco
Going back to black, we're met with the ferocious tones of the Mesa Boogie Mark Five 35 in a bold Black Bronco wrap. One of Mesa's most beloved modern amp heads, the Mark Five 35 drops in with enormous tube-driven muscle to follow up their lengthy legacy of amplified excellence.
The Mesa Boogie Mark Five 35 lines up with a great set of Mesa features to stand the test of time. This all kicks off with Mesa's iconic tube design that employs six Mesa 12AX7 preamp tubes and four Mesa EL84 power tubes. Altogether, this setup of Mesa tubes summons massive sonic power to slice through the mix and make a statement. This mighty tube power is funneled through Mesa's Dyna-Watt technology with its Multi-Watt Channel Assignable power array architecture. With this design, the Mark Five 35 is bumped up with much higher headroom, punch, and power through its baseline thirty-five watts. Two additional power options, twenty-five and ten watts, offer added angles on the Mark Five's tonal palette with routes for looser responses and heightened expression.
Onboard, the Mark Five 35's two-channel design directs an extended lesson in Mesa history. As the Mark Five 35 follows in the footsteps of the Mark Five, it carries with its two channels a Channel 1 original tonal structure and a Channel 2 recreation of Mesa's Mark II-C+ and Mark IV structures. These two channels open the discussion for exceptional exploration into classic Mesa Boogie sounds and ventures into new sonic territory as you sculpt sounds through a five-band graphic EQ and independent channel-shaping tone, Presence, and Gain controls.
Always going above and beyond, this Mesa also includes a number of elements to elevate its experience even higher. For one, the Mark Five 35 is equipped with an onboard CabClone D.I. that comes built with three classic cabinet simulated Voicing modes when routing direct out. For another, this head features a built-in all-tube spring reverb that drops in that splash and nuance to its meaty tube tones. This Mesa outputs to eight or four ohms with one eight-ohm output and two four-ohm outputs and comes with a four-button footswitch and slipcover included.
As one of Mesa's standout heads, the Mark Five 35 stacks mountains of formidable tube tone for incredible amplified experiences. On your mark...
- All-tube amplifier design with Mesa 12AX7 preamp and EL84 power tubes
- Patented Multi-Watt channel-assignable power amp with proprietary Dyna-Watt technology
- Two channels with three power levels and two wiring configurations
- Thirty-five, twenty-five, and ten-watt power operation modes
- Selectable five-band graphic EQ section with bypass option
- All-tube long-tank spring reverb
- Fully buffered tube FX loop
- Onboard CabClone direct out XLR connection with cabinet simulation
- All aluminum chassis with Black Taurus wrap
- Included four-button footswitch and slip cover
- Made in Petaluma, California
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Mesa Boogie Mark Five: 35 Guitar Amplifier Head, Black Bronco
Mesa Boogie Mark Five: 35 Guitar Amplifier Head, Black Bronco
Going back to black, we're met with the ferocious tones of the Mesa Boogie Mark Five 35 in a bold Black Bronco wrap. One of Mesa's most beloved modern amp heads, the Mark Five 35 drops in with enormous tube-driven muscle to follow up their lengthy legacy of amplified excellence.
The Mesa Boogie Mark Five 35 lines up with a great set of Mesa features to stand the test of time. This all kicks off with Mesa's iconic tube design that employs six Mesa 12AX7 preamp tubes and four Mesa EL84 power tubes. Altogether, this setup of Mesa tubes summons massive sonic power to slice through the mix and make a statement. This mighty tube power is funneled through Mesa's Dyna-Watt technology with its Multi-Watt Channel Assignable power array architecture. With this design, the Mark Five 35 is bumped up with much higher headroom, punch, and power through its baseline thirty-five watts. Two additional power options, twenty-five and ten watts, offer added angles on the Mark Five's tonal palette with routes for looser responses and heightened expression.
Onboard, the Mark Five 35's two-channel design directs an extended lesson in Mesa history. As the Mark Five 35 follows in the footsteps of the Mark Five, it carries with its two channels a Channel 1 original tonal structure and a Channel 2 recreation of Mesa's Mark II-C+ and Mark IV structures. These two channels open the discussion for exceptional exploration into classic Mesa Boogie sounds and ventures into new sonic territory as you sculpt sounds through a five-band graphic EQ and independent channel-shaping tone, Presence, and Gain controls.
Always going above and beyond, this Mesa also includes a number of elements to elevate its experience even higher. For one, the Mark Five 35 is equipped with an onboard CabClone D.I. that comes built with three classic cabinet simulated Voicing modes when routing direct out. For another, this head features a built-in all-tube spring reverb that drops in that splash and nuance to its meaty tube tones. This Mesa outputs to eight or four ohms with one eight-ohm output and two four-ohm outputs and comes with a four-button footswitch and slipcover included.
As one of Mesa's standout heads, the Mark Five 35 stacks mountains of formidable tube tone for incredible amplified experiences. On your mark...
- All-tube amplifier design with Mesa 12AX7 preamp and EL84 power tubes
- Patented Multi-Watt channel-assignable power amp with proprietary Dyna-Watt technology
- Two channels with three power levels and two wiring configurations
- Thirty-five, twenty-five, and ten-watt power operation modes
- Selectable five-band graphic EQ section with bypass option
- All-tube long-tank spring reverb
- Fully buffered tube FX loop
- Onboard CabClone direct out XLR connection with cabinet simulation
- All aluminum chassis with Black Taurus wrap
- Included four-button footswitch and slip cover
- Made in Petaluma, California
Original: $2,029.00
-65%$2,029.00
$710.15Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Going back to black, we're met with the ferocious tones of the Mesa Boogie Mark Five 35 in a bold Black Bronco wrap. One of Mesa's most beloved modern amp heads, the Mark Five 35 drops in with enormous tube-driven muscle to follow up their lengthy legacy of amplified excellence.
The Mesa Boogie Mark Five 35 lines up with a great set of Mesa features to stand the test of time. This all kicks off with Mesa's iconic tube design that employs six Mesa 12AX7 preamp tubes and four Mesa EL84 power tubes. Altogether, this setup of Mesa tubes summons massive sonic power to slice through the mix and make a statement. This mighty tube power is funneled through Mesa's Dyna-Watt technology with its Multi-Watt Channel Assignable power array architecture. With this design, the Mark Five 35 is bumped up with much higher headroom, punch, and power through its baseline thirty-five watts. Two additional power options, twenty-five and ten watts, offer added angles on the Mark Five's tonal palette with routes for looser responses and heightened expression.
Onboard, the Mark Five 35's two-channel design directs an extended lesson in Mesa history. As the Mark Five 35 follows in the footsteps of the Mark Five, it carries with its two channels a Channel 1 original tonal structure and a Channel 2 recreation of Mesa's Mark II-C+ and Mark IV structures. These two channels open the discussion for exceptional exploration into classic Mesa Boogie sounds and ventures into new sonic territory as you sculpt sounds through a five-band graphic EQ and independent channel-shaping tone, Presence, and Gain controls.
Always going above and beyond, this Mesa also includes a number of elements to elevate its experience even higher. For one, the Mark Five 35 is equipped with an onboard CabClone D.I. that comes built with three classic cabinet simulated Voicing modes when routing direct out. For another, this head features a built-in all-tube spring reverb that drops in that splash and nuance to its meaty tube tones. This Mesa outputs to eight or four ohms with one eight-ohm output and two four-ohm outputs and comes with a four-button footswitch and slipcover included.
As one of Mesa's standout heads, the Mark Five 35 stacks mountains of formidable tube tone for incredible amplified experiences. On your mark...
- All-tube amplifier design with Mesa 12AX7 preamp and EL84 power tubes
- Patented Multi-Watt channel-assignable power amp with proprietary Dyna-Watt technology
- Two channels with three power levels and two wiring configurations
- Thirty-five, twenty-five, and ten-watt power operation modes
- Selectable five-band graphic EQ section with bypass option
- All-tube long-tank spring reverb
- Fully buffered tube FX loop
- Onboard CabClone direct out XLR connection with cabinet simulation
- All aluminum chassis with Black Taurus wrap
- Included four-button footswitch and slip cover
- Made in Petaluma, California
